How to Sync Hexagon LED Lights to Music

By TECKNET official website | Published: 2026-10-20

Category: How-to Guides

Learn how to sync TECKNET Hexagon LED Lights to music using the app, remote, or wired control. Step-by-step guide for music-reactive RGB wall panels.

Quick Answer

You can sync TECKNET Hexagon LED Lights to music using the free app, the included remote, or the wired control box. Each method gives you real-time beat-reactive color and pattern effects.

Choosing Between App, Remote, or Wired Control

The TECKNET Hexagon LED Lights offer three ways to enable music sync: the smartphone app (Bluetooth), the remote control (IR), or the physical control box with a built-in microphone. Your choice affects range and convenience. The app gives you the most precision — you can pick from 16 million colors and over 200 dynamic modes — but it requires Bluetooth to stay connected. The remote works from across the room without a phone, but it uses preset modes only. The wired control box is always at hand but has fewer customization options. For the best beat-reactive experience, use the app first, then switch to remote for quick mood changes.

Step-by-Step: Sync TECKNET Hexagon LED Lights to Music

1. Power On the Lights and Download the App: Plug in the lights and press the power button on the control box. Download the TECKNET LED app from your phone's app store (iOS or Android). Turn on Bluetooth and location services for your phone. Common mistake: Forgetting to enable location permissions on Android — the app needs it to scan for Bluetooth devices even if GPS isn't used.
2. Pair the Lights via Bluetooth: Open the app and tap 'Add Device' or the (+) icon. Select 'Hexagon Lights' from the list. Wait for the lights to flash — this confirms pairing. If the app doesn't find the lights, hold the 'M' button on the control box for 3 seconds to reset Bluetooth. Checkpoint: Ensure the phone is within 10 meters of the control box. Thick walls may reduce range.
3. Enable Music Sync Mode in the App: In the app's main screen, tap the music note icon or find 'Music Mode'. Choose between 'Microphone' (real-time ambient sound) or 'Audio Line-In' (direct audio from a 3.5mm cable). For most users, 'Microphone' is easiest — just place the control box near the speaker. Common mistake: Placing the control box too far from the speaker — the mic picks up room noise instead of the beat, causing jerky effects.
4. Adjust Sensitivity and Color Palette: Use the slider in the app to set sensitivity (low for subtle, high for lively). Pick a color range or let the lights cycle through random hues. For a cohesive look, choose warm tones for slow music and cool tones for fast tracks. Checkpoint: If the lights barely move, increase sensitivity. If they flash constantly, lower it.
5. Try the Remote or Control Box as an Alternative: Press the 'Music' button on the remote to cycle through built-in beat-reactive presets. On the control box, press the 'Mode' button until you see a music note icon. These methods use the box's internal mic and are less customizable but work without a phone. Common mistake: Using the remote in a bright room with direct sunlight — the IR sensor on the control box may not register commands. Point the remote directly at it.

What You Need

TECKNET Hexagon LED Lights,8 Pack RGB Gaming Hex Wall Light Panels Sync to Music,Smart Lights with APP & Remote & Wired Control: You can choose from 16 million colors and over 200 dynamic modes with the app control. This means you can fine-tune the lights to respond exactly to the music genre, from subtle pulses to vibrant chases.
TECKNET Hexagon LED Lights,8 Pack RGB Gaming Hex Wall Light Panels Sync to Music,Smart Lights with APP & Remote & Wired Control