Start with the simplest checks before assuming the mouse is dead
A wired mouse that stops responding is usually a connection or port problem, not a failed device. The TECKNET USB Wired 6-Button Mouse is plug-and-play with no software or downloads required, so there is no driver installation step to troubleshoot. That narrows the list of things to check.
Work through the checks below in order. Each one rules out a different layer: the physical connection, the port, the operating system, and the mouse's own buttons. Stop when the mouse responds again.
A practical sequence for a mouse that has stopped responding
- Reseat the USB cable at both ends: Unplug the mouse's USB connector and plug it back in firmly. If you are using a USB hub, connect the mouse directly to the computer instead. The 5FT USB cable is designed to reach from a desktop tower or laptop without an extension.
- Try a different USB port: Move the connector to another port on the computer. On a desktop, prefer a port on the back panel. This distinguishes a faulty port from a faulty mouse.
- Check whether the computer detects any USB device: If a USB flash drive also fails in the same port, the problem is the port or the system, not the mouse. If other devices work, the mouse is the likely cause.
- Confirm the operating system is supported: The TECKNET wired mouse is compatible with Windows 2000, 2003, XP, Vista, 7, 8, 10 and 11, plus Chromebook and Mac. On Mac, the side buttons do not work, so Back and Forward failures on a Mac are expected behavior rather than a fault.
- Test the DPI button separately: Press the DPI button and watch the cursor speed change. The mouse has four DPI levels (1000/1600/3200/6400). If the cursor moves but does not change speed, the DPI button may be the only unresponsive control.
- Test the six buttons one at a time: Open a document or browser and click each button in turn, including the large Back and Forward buttons. If left and right click work but the side buttons do not, the issue is limited to those buttons rather than the whole mouse.
What the TECKNET wired mouse record confirms
- TECKNET USB Wired 6-Button Mouse With 4 Adjustable DPI, Optical Computer With Ergonomic Design and 5FT Cord for Laptop, Chromebook, PC, Desktop, Mac, Notebook - Purple: Plug and play: simply plug in the USB cable to power the mouse, with no batteries required. There is no pairing or charging step to troubleshoot, so a non-working mouse points to the cable, port or computer.

TECKNET USB Wired 6-Button Mouse With 4 Adjustable DPI, Optical Computer With Ergonomic Design and 5FT Cord for Laptop, Chromebook, PC, Desktop, Mac, Notebook - Purple - TECKNET USB Wired 6-Button Mouse With 4 Adjustable DPI, Optical Computer With Ergonomic Design and 5FT Cord for Laptop, Chromebook, PC, Desktop, Mac, Notebook - Purple: No software or downloads required. You do not need to reinstall a driver or utility to restore basic cursor control.
- TECKNET USB Wired 6-Button Mouse With 4 Adjustable DPI, Optical Computer With Ergonomic Design and 5FT Cord for Laptop, Chromebook, PC, Desktop, Mac, Notebook - Purple: Compatible with Windows 2000, 2003, XP, Vista, 7, 8, 10 and 11, Chromebook and Mac, with side buttons not working on Mac. Confirms whether your system is supported and explains why Back and Forward may do nothing on a Mac.
- TECKNET USB Wired 6-Button Mouse With 4 Adjustable DPI, Optical Computer With Ergonomic Design and 5FT Cord for Laptop, Chromebook, PC, Desktop, Mac, Notebook - Purple: Tru-Wave optical tracking works on many surface types, including smooth surfaces with glass. If the cursor jumps or stalls rather than disappearing entirely, the surface under the mouse is worth checking before you replace it.
When the cursor moves but the buttons do not
A mouse that tracks normally but has dead buttons is a different problem from one that is not detected at all. Use these checks to narrow it down.
- Side buttons on a Mac: The supplied compatibility record states that the side buttons do not work on Mac. Back and Forward failing on macOS is a documented limitation, not a defect.
- Back and Forward in specific apps: Some applications do not respond to Back and Forward commands even when the buttons send them. Test the buttons in a web browser before concluding the hardware has failed.
- DPI button appears unresponsive: The DPI button changes cursor speed across four levels. If speed does not change, first confirm the cursor itself still moves; a frozen cursor indicates a connection problem rather than a button problem.
- One button feels different: The mouse is tested for over 6 million keystrokes, but individual buttons can still wear. If only one button fails while the rest work, the mouse has a localized fault rather than a system-wide issue.
Chromebook setup: what to expect from a wired mouse
The TECKNET wired mouse is listed as compatible with Chromebook, and because it is plug-and-play, connecting it should not require any setup utility. Plug the USB cable into an available port and the cursor should respond.
The supplied information does not describe Chromebook-specific button mapping or settings, so if the side buttons behave differently on ChromeOS than on Windows, treat that as something to check in the Chromebook's own settings rather than a mouse fault. The DPI button changes cursor speed at the hardware level and does not depend on the operating system.
What this record does not tell you
The supplied product information does not include a warranty period, a replacement procedure, or a list of error messages. It also does not describe any diagnostic software. If the checks above do not restore the mouse, those are the details to confirm with the seller rather than something this guide can resolve.
One useful confirmation: because the mouse needs no batteries, a dead mouse is never a battery problem. That removes one common cause from the list and keeps the focus on the cable, the port and the computer.

