How to Pair TECKNET Mini Wireless Keyboard and Mouse Combo

By TECKNET official website | Published: 2026-10-30

Category: How-to Guides

Learn how to connect your TECKNET Mini Wireless Keyboard and Mouse Combo (X315) in minutes. Follow these simple steps to get your 2.4GHz combo working on Windows, Mac, and more.

Quick Answer

To pair your TECKNET Mini Wireless Keyboard and Mouse Combo (X315), insert the included 2.4GHz USB receiver into your computer, power on both devices, and they should connect automatically. If not, follow the manual pairing steps below.

Why 2.4GHz Pairing Is Usually Plug-and-Play

The TECKNET X315 combo uses a 2.4GHz wireless connection, which is designed for a stable, interference-resistant link with a single USB receiver. Unlike Bluetooth, there's no need to search for devices or enter PINs—the receiver and devices are pre-paired at the factory. This makes setup fast, but it also means you need to keep the receiver safe and insert it directly into your computer's USB port, not a hub or extension cable, to avoid connection issues.

What to Do If the Devices Don't Connect Automatically

If your keyboard or mouse doesn't respond after plugging in the receiver, don't panic. The most common causes are low battery, the receiver not being fully inserted, or the devices being in a low-power sleep state. The steps below will guide you through checking each of these and manually re-syncing the devices if needed.

Step-by-Step Pairing Guide

Insert the USB receiver: Plug the included 2.4GHz USB receiver into an available USB port on your computer. Use a port directly on the computer, not a hub, to ensure a stable connection. If the receiver is already in a hub and the devices don't work, try a direct port first.
Power on the keyboard and mouse: Turn on both devices using their power switches (usually on the bottom or side). Make sure the switches are in the ON position, not just in a low-power mode. If the devices don't respond, check the battery polarity and replace with fresh batteries if needed.
Wait for automatic connection: Within a few seconds, the keyboard and mouse should connect automatically. Test by moving the mouse and typing a few characters. If nothing happens, move the receiver to another USB port and try again.
Manually re-sync the devices (if needed): If automatic pairing fails, locate the small connect buttons on the keyboard and mouse (often near the battery compartment). Press and hold the connect button on the keyboard for about 3 seconds, then do the same on the mouse. The devices should link to the receiver within 10 seconds. Make sure the receiver is still plugged in during this process and that the devices are within 3 feet of the receiver.
Troubleshoot common issues: If the devices still don't work, try the following: 1) Replace the batteries, 2) restart your computer, 3) test the receiver on another computer to isolate the issue, and 4) check for USB port power management settings that may disable the receiver. If the receiver works on another computer, the problem may be with your system's USB settings; check your power management options for USB devices.

About the TECKNET X315 Combo

TECKNET Mini Wireless Keyboard and Mouse Combo 2.4GHz X315: The X315 features an ultra-slim, travel-friendly design that slides easily into backpacks and laptop bags for mobile professionals and remote work setups. Because it's compact, you can keep the USB receiver in the mouse's battery compartment or a dedicated slot while traveling, so you won't lose it and can set up quickly anywhere.
TECKNET Mini Wireless Keyboard and Mouse Combo 2.4GHz X315