TECKNET KB005 Multi-Device Keyboard: Switching Devices Explained
By TECKNET official website | Published: 2026-10-31
Category: How-to Guides
Learn how to pair and switch between four devices on the TECKNET KB005 multi-device keyboard, plus battery charging tips for reliable everyday use.
Quick answer
Pair each device once using one of the four channels (three Bluetooth, one 2.4G), then switch by pressing the channel key for that device. Charge the keyboard fully before first use to avoid pairing interruptions.
Why four channels change how you work
The KB005 gives you four independent connections, so you can keep a laptop, tablet, phone, and a 2.4G receiver-equipped computer paired at the same time. Switching is instant and does not require re-pairing. The 15-meter range means you can move around a room without losing the connection, but walls and other wireless devices can reduce that range in practice.
When Bluetooth is the better choice, and when it is not
Bluetooth is ideal for tablets and phones where USB ports are scarce, and it avoids using a receiver. However, some older devices or operating systems may have Bluetooth limitations, and you may need to consult their documentation. The 2.4G mode via the included receiver is often more reliable for a desktop or laptop, especially if you notice Bluetooth interference from other devices.
Step-by-step: pair and switch devices on the KB005
- Charge the keyboard before first pairing: Connect the keyboard to a USB charger or computer using the included cable and charge for about 2 hours. A full charge ensures stable pairing and avoids unexpected shutdowns during setup. A charged battery prevents pairing failures caused by low power.
- Choose a channel for each device: Decide which channel (1, 2, 3 for Bluetooth; 4 for 2.4G) you will use for each device. For example, use channel 1 for your laptop, channel 2 for your tablet, channel 3 for your phone, and channel 4 for a desktop via the USB receiver. Labeling channels mentally or with a sticker helps you remember which key belongs to which device.
- Pair a Bluetooth device: Press and hold the channel key (1, 2, or 3) for about 3 seconds until the indicator light flashes. On your device, open Bluetooth settings, find 'TECKNET KB005' (or similar), and select it to complete pairing. Repeat for each Bluetooth device on a different channel. If pairing fails, make sure the keyboard is in pairing mode (flashing light) and your device's Bluetooth is on and discoverable.
- Connect a device via 2.4G receiver: Plug the USB receiver into a USB-A port on your computer. Set the keyboard to channel 4 by pressing the 4 key. The connection should establish automatically; if not, press and hold the channel 4 key for 3 seconds to re-sync. Keep the receiver in a stable port; avoid USB hubs that may cause interference.
- Switch between paired devices: To switch, simply press the channel key (1, 2, 3, or 4) that corresponds to the device you want to use. The keyboard will reconnect within a few seconds. No need to re-pair. If a device does not respond, press the channel key again or check that the device is within range and awake.
- Maintain battery health with smart charging habits: Charge the keyboard when the low-battery indicator appears, or every few months if unused. The auto-sleep feature turns off the keyboard after inactivity, but you can also manually switch it off using the power switch to conserve battery. Avoid leaving the keyboard in direct sunlight or extreme heat, which can degrade battery life.
Product facts
- TECKNET Ultra-Slim Multi-Device Rechargeable Wireless Keyboard KB005: 4 connection modes: 3x Bluetooth and 2.4G wireless, switch between up to 4 devices within a 15-meter range. You can keep all your devices paired simultaneously and switch with a keypress, no need to re-pair each time.
TECKNET Ultra-Slim Multi-Device Rechargeable Wireless Keyboard KB005 - TECKNET Ultra-Slim Multi-Device Rechargeable Wireless Keyboard KB005: Built-in 500mAh rechargeable battery delivers up to 180 days of use on a single 2-hour charge with auto-sleep functionality. A full charge lasts months under normal use, and auto-sleep helps preserve battery when you forget to turn it off.
